Pre-Owned Circa 2019 Tonebone PZ-PRE Acoustic Preamp Black and Brown and Green

$ 299.00

Pre-owned, basically like new ToneBone PZ-PRE. Comes with original box, packaging, power adapter and manual.

The Radial ToneBone PZ-Pre Acoustic Instrument Preamp is the most powerful acoustic preamplifier ever to be put inside a pedal. The two inputs have been designed to accept all types of pickups; so the PZ-Pre works with all types of instruments including violin, cello, contrabass, mandolin, Dobro, bouzouki, harp, sitar and banjo! The on-board equalizer is both very powerful and musical.
The Radial ToneBone PZ-Pre Acoustic Instrument Preamp is designed to work with ANY acoustic instrument including banjo, violin, cello, mandolin, contrabass, bouzouki or lute. The magic lies in the combination of high performance 100% discrete class-A PZB piezo boosters, an ultra-quiet preamp circuit that will adapt to any pickup system and a host of connectivity options that will put you in total control.
The Radial ToneBone PZ-Pre is equipped with two inputs for quick instrument changes on stage. These can also be combined to blend two pickups together if you so desire. Features include a powerful yet warm sounding semi-parametric EQ to tailor your sound, feedback eliminating controls including a dual-Q notch filter to surgically remove feedback, a high-pass filter to cut low frequency resonance, and a phase reverse switch to eliminate hot spots on stage. It is also equipped with a host of outputs: a ¼" hi-Z instrument out for an on-stage amp, a pre-EQ balanced XLR output for the PA system and a post EQ XLR out for stage wedges or in-ear monitors. A dedicated tuner out with mute switch lets you quietly tune on-stage. There's even a combination power booster - effects loop to add sizzle and dynamics to the performance and extra presence when soloing!

Compact and easy to use, the Radial ToneBone PZ-Pre packs in all of the features you need to take your acoustic instrument from home to studio and club to concert.

Radial ToneBone PZ-Pre Acoustic Instrument Preamp Features
Two channels to switch between instruments
Notch & resonance filters eliminate feedback
Pre & Post Radial DI outputs for PA and monitors
Power booster and mute for more control on stage
Quick efficient instrument change-over
Works with upright bass, violin, mandolin...
Works with active or passive pickups
Blend the sound from two pickups together
Studio quality preamp in a pedal
Puts you in control of your instruments tone
No Amp? Go direct with balanced XLR outputs
Works with virtually any instrument
Radial ToneBone PZ-Pre Acoustic Instrument Preamp Applications
Using two acoustic guitars on stage - The Radial ToneBone PZ-Pre is the perfect stage partner for switching between two acoustics. You can have one for backup, alternate tuning or switch from 6-string to 12-string with ease.
Using upright and electric acoustic - Switch between contrabass and electric or acoustic bass with a simple foot stomp! The Radial ToneBone PZ-Pre's input is easily optimized to work with finicky piezo pickups for a deeper, more natural tone.
Using the PZ-Pre on violin and mandolin - Using the Radial ToneBone PZ-Pre with a piezo transducer will give you more gain before feedback than a microphone. You will be surprised at how good a piezo can sound when connected to a Radial ToneBone PZ-Pre!
Radial ToneBone PZ-Pre Acoustic Instrument Preamp Specifications
Circuit Type: Proprietary active circuit
Standard Input Impedance: 6.8k Ohm at input jack ('PZB' switch out)
Input With PZB Switch In Impedance: 10meg Ohm at input jack
Output Impedance: 1k Ohm
Low Cut Roll-off:
Position 1: 75Hz
Position 2: 2:220Hz
Notch Freq. Range: 56Hz to 330Hz
Notch Q:
Setting 1: -8dB
Setting 2: -15dB
Low: Shelving, +/- 12dB @ 75Hz
Mid: Parametric, +/- 12dB @ 82Hz to 5.6kHz
High: Shelving, +/- 12dB @ 7.5kHz
Boost Level: 12dB
Effects Send & Receive: -10dB
FX Loop Impedance:
Send: 1k Ohm
Receive: 15k Ohm
Polarity: 180° switch (absolute phase reversal)
Input-1: ¼" unbalanced
Input-2: ¼" unbalanced
Insert Send/Receive: ¼" unbalanced
Amp Output: ¼"unbalanced, Hi-Z, 1k Ohm
Tuner Output: ¼"unbalanced, Hi-Z, 6.8k Ohm
Pre-EQ Output: XLR balanced mic level 600 Ohms
Post-EQ Output: XLR balanced mic level 600 Ohms
Footswitches: (Three) Mute, Boost, Toggle 1-2, Heavy-duty high-cycle switches
LED Indicators: Large 3mm OD ultra-bright LED indicators for mute, boost, Ch-1 & Ch-2 toggle status
Construction: 14 guage steel, baked enamel finish
Size: 8"w x 4 ¼"d x 2"h (205 x 110 x 51mm)
Weight: 2.7lbs (1.2kg)
Add to Wishlist
Contact Rivington Guitars About This Item